A Cardioid condenser hanging microphone with integral power module. Suitable for use over stages, choirs, orchestras etc. The microphone is very small, and almost invisable once installed. Hi-SPL handling is perfect for suspension over choirs and orchestras etc. The wide-range condenser element with low-mass diaphragm offers superior performance. The Self-contained electronics eliminates the need for external power modules. The microphone has a flat, smooth frequency response. 25' (7.6 m) cable permanently attached between microphone with XLRM-type connector. The microphone is phantom powered only. Where phantom is not available, use AT8801 single power supply or CP8506 four channel power supply.
PRO 45 Specifications
Element : Condenser
Signal to Noise Ratio: 66 dB, 1 kHz at 1 Pa
Polar Pattern: Cardioid
Dynamic Range (Typical): 106 dB, 1 kHz at Max. SPL
Frequency Response: 70 - 16,000 Hz
Phantom Power Requirements: 9 - 52V, 2 mA typical
Open Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 Pa
Weight: 0.5 oz (15 g)
Impedance: 100 ohms
Power Module: Integral
Maximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.
Output Connector: XLRM-type on cable
Supplied with foam wind shield and wire hanger.
Also available in white as PRO 45W
|